Despite the fact that Indian summer day slowly passed into the woman’s fall, and almost become a separate, fifth, season, the weather seers confidently state that has a woman’s winter, presumably, can not be. Soon the winter will present and its concomitant cold weather, as our newspaper warned in advance of its readers. We recommended the stock up convectors and fan heaters, equipped with a flat counters spent on heating electricity and hot water heat, lay the heating cable systems, use other means available in an assortment “IGO Electric, and continues to insist that live in the warmth better than freeze.
On the pages of our newspapers, we have already presented an affordable and efficient way to heat yourself and others through the space heating through the floor, and a specialist team of technical information IGO Electric revealed the secrets of electric cable heating systems. In principle, they can be used as basic as you can not connect to the central heating, and as additional, creating a cozy rooms, offices, bathrooms, basins, toilet suites.
- Batteries are rarely improve design and building heat unevenly, and the floors are often cold. The heating elements are “warm floors” are hidden from the eye, but allows the thermostat to control the temperature within specified limits. “Warm floor” is safe to use, reliable and durable, – said Serg, and explained the device of this system:
- It is based on the radiant heating cable or heating mat that is placed on a rough floor at the stage of renovation. Control of the heating cable is controlled by a temperature sensor and thermostat.
Heating can be direct, that is heated directly in the connection. It is used usually in wet areas. And partial-accumulation – when the floor gives off heat during heating, and after a power outage, have your own accumulated. It is used mainly in areas where coverage has a large thermal resistance (parquet, carpet, linoleum).
S. Puhtin noted that the latter type of heating is suitable for use dvuhtarifnogo electric meter: the heat stored in the watch cheap night rate, passed the room during the day.
Cable Kits “Teplolux” Made LLC Special Systems and Technologies “, Mytischi) are recommended for bedrooms, nurseries and other rooms where people spend most of their time. Products of different brands of this series can be chosen so that the warm area from corner to 1,8 m2 to room 20 m2, with consumption from 0.27 to 2 kW, as required heating section (a section of twisted pair cable of fixed length) are added. Includes a section itself, thermostat, temperature sensor, which is mounted in the floor, and bellows for him. Metal mounting strap with petals can rigidly fix the cable and even withstand a step layout for attaching the section to the floor. The system allows not only to maintain the required temperature, but also to save while a third spent on heating energy. And by using thermal insulation (for example, “Termofola – polyethylene foam with a layer of lavsan and aluminum foil) are useless and excluded the lower heating floors.
Manufactured to provide greater electrical, mechanical and fire safety and security, not recommending, at the same time, mounting system under a stationary arrangement of furniture and equipment (sofas, cabinets, dishwashers, gas stoves).
Cable «Tassu» Finnish company «Ensto», in principle, similar to domestic, differs only by specific characteristics. He is ready for laying a shielded heating element power density 20 W / m Laid at a depth of 3-8 cm below the cement flush and decorative coating. Available in nominal capacity from 0,24 to 2,2 kW and is designed for space heating from 1,5 to 27 m2.
Heating mat – will not complicate anything in the explanations – is the same heating cable, with the same electrical characteristics and heat-generating opportunities. Cable is enclosed in a two-layer insulation and braided shield. But the math simplifies installation, as producer half of your work is already done: he put a snake on a special cable net, fastened it to her and written instructions what to do next.
And then you have to prepare a place for the thermostat (it can be installed individually or in alliance with the sockets, switches), proshtrobit wall liner for food and the floor beneath the sensor, to sweep the floor, bedding insulation pack mate, ask a specialist to perform the electrical connections, put flooring (tile, carpet, flooring) to the appropriate solution, glue or paste, and, after 10 days, to begin to enjoy the comfort.
Note: after 10 days, not 28, which are necessary for drying thick cement ties at installation “vnematovogo” cable. Just in the cement covering is not necessary.
“Mat” Teplolux-mini »of Mytishchi can be installed in conjunction with other types of heating devices. The mats are placed in a solution for fixing flooring.
«ThinMat» Company «Ensto» – one of the latest innovations in the Finnish assortment MPO Wiring “. He looks like a native, but made in the company «Ensto». Again, that the mats, as well as cables can dock to warm up the largest area. And you can “cut” grid (without breaking the cable!) To lay the mat on the floor of a complex configuration or circumvent sofas and cabinets.
This is not just “warm”, ideal for direct heating, but also “thin” the floor. At its core cable is almost twice thinner than that of «Tassu». And mounted on the surface of the floor mat is easy, on the basis of self-adhesive, a layer of tile adhesive or mastic. He produced a strip of 48 cm in length from 2 to 10 hours to a single thermostat can connect two identical mat.
- Bear in mind that not every flooring material suitable for use with such heating systems, – said Sergei Puhtin. – For example, beech flooring, cork boards or planks of the floor for this little fit. A heating bath and other wet rooms should be used more and the unit breaker at 30 mA.
«ThinMat» Company «Ensto» par 100Vt/m2 intended for use in well-insulated rooms with tiled or require limitations on the power of the sexes (such GVLV). “Thin mat” at 160 W/m2 used in wet or poorly insulated buildings with concrete, tiled or stone floors. Each of them, if necessary, is completed with a specially designed thermostat.
If you have already decided to make the house floor heating in commercial offices “MPO Wiring” technical consultants will help you choose the right area and the electrical characteristics of a set of commodity group P90. In addition, they recalled that in our range have appeared more and Danish heating «DEVI» of the world’s leading manufacturer of floor heating systems (commodity group P93).
And if you have not yet decided, we recall, the legs must be kept warm, if there is a fear that his head would not stay in the cold. “Warm floor” for this – the best remedy.
