Welding parameters are applied in the form of a bar code by which excludes fundamental errors such as incorrect input of time and stress of welding in manual mode. This rule is established as a global standard.
Code PEX fitting occurred on every detail in the form of label, which excludes the possibility of its loss. Scheme of the barcode is standardized and provides an opportunity not only to determine the welding parameters, but also record data such as information about the producer, information on the welding process, etc., if the welder provides logging capability. The second bar code below, contains the data necessary to track the PEX fitting, which can be separately recorded as an option and used in an electronic record tube.
The second bar code below, contains the data necessary to track the PEX fitting, which can be separately recorded as an option and used in an electronic record tube.
Thanks to this international system of bar code completely excluded the possibility of incorrect identification of parameters.
The bar code also contains the so-called temperature compensation. Welder adjusts the energy required for the welding process, always individually depending on the ambient temperature.
The ambient temperature is measured by a sensor mounted in the immediate vicinity of the welding. Recorded in the bar-code welding time for an ambient temperature of 20 ° C is automatically increased at low temperature and decreases at high. With this in an enclosed, secure PEX fitting the contact zone are at different ambient temperatures of approximately the same conditions of welding.
